Making Coffee; Using The Timer; Self Clean - Russell Hobbs Elegance 23370-56 Instrucciones

MAKING COFFEE

If you want coffee straight away:
Press the 1 button – the e icon will appear on the display.
1.
2. Shortly afterwards, coffee will start to drip into the carafe.
3. When it's done, the hotplate will keep the carafe warm.
4. If you want to stop the coffee maker while it's brewing, press the 1 button.

USING THE TIMER

1. Set the clock to the correct time. Use the hr and min buttons.
2. Set the timer to the time you want to start brewing.
Press the T button .
a)
b) Use the hr and min buttons to set the time you want brewing to start.
If you don't press either the hr or min buttons within 5 seconds, the coffee maker will revert to
"normal", and the current time will show. Press the T button to start again.
When the time is programmed, press the 1 button. The light above the T button will come on and
3.
the T icon will appear on the display. Your coffee maker is now set to make coffee at the selected
time.
If you want to check the program time press the T button. The programmed time will show for 3
4.
seconds and then return to the time of day.
5. If you want to cancel the timer before brewing has started, press the 1 button.
6. If you want to stop the coffee maker while it's brewing, press the 1 button.
KEEP WARM/AUTO SHUT-OFF
1. The coffee maker will keep the coffee warm for about 40 minutes. P and 40:00 will be displayed and
will count down in 1 minute increments.
2. 40 minutes after brewing, the P icon will go out and the coffee maker will shut down and the time of
day will be displayed.
3. To wake the appliance, press any button.
4. If left for much more than an hour, chemical changes start to affect the flavour of the coffee. It's best
to pour it away and make a fresh brew.
A QUICK CUP
If you want a quick cup of coffee before the brewing cycle has finished:
1. You can remove the carafe at any time. The non-drip valve will prevent coffee dripping on to the
hotplate.
2. To prevent the filter holder overflowing, replace the carafe on the hotplate within about 20 seconds.
3. When you replace the carafe on the hotplate the non-drip valve opens to let any remaining coffee
through.

SELF CLEAN

After 60 brewing cycles, the clean icon V will appear on the display. This is to remind you to activate your
coffee maker's self cleaning feature.
You can use a vinegar solution or a commercial descaling product designed for coffee machines. Follow
the directions on the descaling product. If you use a vinegar solution, ensure the kitchen is well ventilated,
as heating vinegar causes an unpleasant smell.
This operation will take approximately 45 minutes.
1. Mix 500ml of white vinegar with 500ml of water in the carafe.
2. Pour the mixture into the reservoir. Don't fill above MAX.
3. Close the lid.
4. Replace the carafe on the hotplate.
5. Put the plug into the power socket.
Press the i button. The light above the button will come on and the e icon will appear on the
6.
display.
4