ENGLISH
Thank you for purchasing the Tronsmart Studio Bluetooth Speaker. Please read the user
manual before use and keep it handy for future reference. If you have any additional
PACKAGE CONTENTS
1 x Studio Bluetooth speaker
1 x Type-C charging cable
Aux-in Mode
Simply connect the speaker with your non-Bluetooth device via the 3.5 mm audio jack cable.
Note: After plugging in an audio cable, the speaker will automatically switch to Aux-in mode.
TF Card Slot Mode
The speaker will play the music from your TF/Micro SD card when plugging the card into the
slot.
Auto Power Off
The speaker will power off automatically after 15 minutes if it does not pair with any device
through Bluetooth . When in low battery, the speaker will power off automatically as well.
Reset to Factory Default Settings
Press and hold the Play/Pause button for 5 seconds to reset to factory default settings.
Care & Maintenance
Do not use any form of detergents or cleaning material to clean the product as any type of
chemical may make this device unusable. Do not disassemble this product. It contains no user
serviceable parts. Do not drop or jump on it and treat it with care for the best performance.
Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the
body of the product if kept at an unfriendly place. Do not dispose this product in fire or
batteries may explode or leak.
Warranty Information
Your 'Tronsmart Studio Bluetooth Speaker', is warranted to the original owner for 12 months
from the date of purchase against defects in material and workmanship under normal use
and service. Tronsmart is not responsible for the accidental use of this product and its liability
will not exceed the purchase price of the product. If you have any problems while using the
product, please do not hesitate to contact our customer support team at
Model
Bluetooth
Bluetooth profile
Audio decoding
Bluetooth transmission
Li-battery Capability
Power
Power supply
Frequency range
Playtime
Standby
Charging time
Dimension
Weight
1 x 3.5mm audio cable
1 x Warranty card
Studio
5.0
A2DP V1.3, ACRCP V1.4, HFP V1.6
SBC
Up to 10m/33ft (open area)
3.7V/2500mAh*2
30W
DC 5V/2A, via Type-C port
20Hz - 20000Hz
Up to 15 hours (on a 50% volume)
About 24 months
3 -3.5 hours
8.13 x 2.76 x 2.28 inches / 206.5 x 70 x 58 mm
961g
1 x SoundPulse
1 x User manual
Card
®