VERTO 50G287 Manual De Instrucciones página 11

• Before using the charger, read all relevant information
contained within this manual, see markings on the
charger and the product it is designed for.
• To reduce the risk of potential body injury use the
charger for charging Li-Ion batteries only. Batteries of
other types may explode and cause personal injury or
material damages.
• Do not expose the charger to humidity or water.
• Use of any connecting elements not supplied or not
recommended by the manufacturer of the charger may
cause fire, personal injury or electric shock.
• Make sure the power cord is not located in a pathway,
is not exposed to treading or other danger (e.g. strong
tension).
• Do not use extension cord unless absolutely necessary.
Use of improper extension cord may cause fire or electric
shock. If it is necessary to use extension cord, first make
sure that:
– Extension cord socket matches plug prongs of the
original charger power cord.
– Extension cord is in good technical condition.
• Do not use the charger with damaged cord or plug.
Damage should be repaired by a qualified person.
• Do not use the charger after it has been hit, dropped or
otherwise damaged. Entrust the testing and potential
repair to authorized service workshop.
• Do not try to dismantle the charger. All repairs should
be made by an authorized service workshop. Improper
charger assembly may cause electric shock or fire.
• Disconnect the charger from power supply before
starting any maintenance or cleaning.
• In case of battery damage or improper use it may
produce gas. Ventilate room and seek medical attention
in case of medical symptoms.
• Keep the charger clean. Dirt can be the cause of electric
shock.
• Do not use charger when placed on flammable surface
(e.g. paper, textiles) or in proximity of flammable
substance. Greater charger temperature during charging
increases risk of fire.
When the charger is not in use, it should be
disconnected from mains network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures
and additional safety systems are used, nevertheless
there is always a small risk of injuries at work.
Li-Ion batteries may leak, set on fire or explode when
heated to high temperature or short-circuited. Do not
store the batteries in a car in hot and sunny days. Do
not open the battery. Li-Ion batteries contain electronic
protection devices that, if damaged, may cause fire or
explosion of the battery.
EXPLANATION OF USED SYMBOLS
1
5
9
Read the instruction manual, observe warnings and
1.2.
safety conditions therein.
Use protective goggles and hearing protectors.
3.
Keep the tool away from children.
4.
Protect against rain.
5.
Device with class II insulation.
6.
Disconnect the power cord before starting
7.
maintenance or operation.
Use indoors, protect from water and moisture.
8.
Do not throw into fire.
9.
Maximum permissible cell temperature.
10.
Recycling
11.
CONSTRUCTION AND USE
Drill is a battery powered tool. Drive consists of a DC
commutator motor with permanent magnets and
planetary gear. Drill is designed for screwing in and out
screws and bolts in wood, metal, plastics and ceramics,
and for drilling holes in these materials. Cordless, battery-
powered power tools are especially useful for works in
interior furnishing, adaptation of premises etc.
Use the power tool according to the manufacturer's
instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted
on the drawing pages of this manual.
Quick-release chuck
1.
Torque adjustment ring
2.
Direction selector switch
3.
Battery
4.
Battery lock button
5.
Switch
6.
Illumination
7.
Gear switch
8.
Socket for charger
9.
Charger
10.
LED
11.
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
11
2 3
6 7
10 11
4
8