Local Codes; Product Identification; Unpacking - Procom Heating MN2PHG Manual De Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
25 West 43rd Street
New York, NY 10036
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02269-9101
This heater is designed for vent-free op-
eration. State and local codes in some areas
prohibit the use of vent-free heaters.
Grill
Front
Panel
Figure 1 - Vent-Free Gas Heater
1. Remove heater from carton.
2. Remove all protective packaging applied
to heater for shipping
200317-01E

LOCAL CODES

PRODUCT IDENTIFICATION

Ignitor Button
Control Knob

UNPACKING

www.usaprocom.com
State of Massachusetts: The installation
must be made by a licensed plumber or
gas fitter in the Commonwealth of Mas-
sachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
In the State of Massachusetts the gas
cock must be a T-handle type. The State
of Massachusetts requires that a flexible
appliance connector cannot exceed three
feet in length.
Before beginning assembly or operation of
the product, make sure all parts are present.
Compare parts with package contents list and
Figure 1. If any part is missing or damaged,
do not attempt to assemble, install or oper-
ate the product. Contact customer service for
replacement parts.
Burner
Heater Cabinet
3. Check heater for any shipping damage. If
heater is damaged, promptly inform dealer
where you bought heater.
7

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mn2ptgMn3phgMn3ptgMl2phgMl2ptgMl3phg ... Mostrar todo

Tabla de contenido