en | 7 | T10229A
1 General Information
Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended Use:
For the reception of the engine and gearbox unit
when demounting and installing the 4 cylinder
Injection and diesel engine in the transporter from
model year 2004 in accordance with the workshop
manuals of the Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to 365 kg.
Only use in connection with a suitable engine and
gearbox jack (e.g. VAS 6931/V.A.G. 1383A) (see
workshop manuals of the Volkswagen Group
brands).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use on level, horizontal and weight-bearing
ground.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-06-06
Engine support
Load holding device
T10229A
13 kg
365 kg
3.0
Figure 1:
Engine support T10229A
1
Engine support T10229A
2
2x hexagon screws M10x25, 8.8 with hexagon nut
ISO 4032-M10-8
3
Bolt with hexagon screw M12x35 and spring ring
4
Threaded bolt with hexagon screw M12x35 and spring ring
5
Bolt T10229A/1 with hexagon screw ISO 4032-M10-8
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Capítulos
