Controls & Features; Handlebar Height Adjustment - MTD Rear Tine CRT Tiller 400 Manual Del Operador

Controls & Features
NOTE: This Operator's Manual covers several garden tiller
models. The tiller depicted may differ from yours.
WARNING!
carefully read and understand all safety, controls
and operating instructions in this manual and on the
decals on the machine. Failure to follow these
instructions can result in serious personal injury.
Engine Controls
For detailed information on all engine controls refer to the
separate Engine Operator's Manual.
Reverse Handle
The Reverse Handle controls the reverse drive of the wheels and tines.
Forward Clutch Bail & Tine Engagement
The forward clutch bail controls the engagement of the forward
drive of the wheels and tines.
Tines
Your tiller's tines are a series of hoes arranged on a revolving
power-driven shaft.
10
Reverse Handle
Before operating your machine,
Depth Regulator
Handle Height Adjustment
Side Shield
Rear Tine Shield
Tines
Wheel Drive Pin
Figure 4-1
Depth Regulator Lever
This lever controls the tilling depth of the tines. Pull the lever back
and slide it up or down to engage the notched height settings.

Handlebar Height Adjustment

The handlebar height is adjustable to three different settings. In
general, adjust the handlebars so they are at waist level when the
tines are 3-4" in the ground.
Rear Tine Shield
The rear tine shield protects the operator from flying debris
while also smoothing out freshly tilled soil.
Side Shield
The side shield is used to maintain clear even rows and may be
adjusted to one of five different positions.
Wheel Drive Pins
Each wheel is equipped with a wheel drive click pin that secures
the wheel to the wheel shaft. The wheels can be positioned in
either a WHEEL DRIVE or a FREEWHEEL mode.
4
Forward Clutch Bail
& Tine Engagement