Product Overview - LEGRAND C2G30016 Manual Del Usuario

HDMI HDBaseT + RS232 and IR over Cat Extender Box Scaling Receiver - 4K 60Hz

Product Overview

Front Panel
3 4
1 2 5
F P D
RONT ANEL ESCRIPTION
On: Power is applied to the device.
1 Power LED
Off: No power is applied to the device.
Blinking: The scaler module is working properly.
2 Scaler LED
Off: The scaler module is not working properly.
Blinking: The device is working properly.
3 Status LED
Off: The device is not working properly.
On: HDCP protected content is being transmitted.
4 HDCP LED Blinking: Non-HDCP protected content is being transmitted.
Off: No content is being transmitted.
On: HDBT link is normal.
5 Link LED
Off/Blinking: No HDBT link or link error.
6 Scaler DIP Switch for scaling resolution configuration of the HDMI output.
7 Service Connect to a USB drive for firmware upgrade.
Receiver
6
7
Rear Panel
8
R P D
EAR ANEL ESCRIPTION
12V DC power input. Connect the power supply with power
8 DC 12V
cord provided.
Connect to the HDBT OUT of an HDBaseT transmitter via a
9 HDBT IN
Cat 5e/6/6a cable.
10 IR IN Connect to the IR receiver.
11 IR OUT Connect to the IR emitter.
12 HDMI OUT Connect to an HDMI display using an HDMI cable.
Connect to an audio device for de-embedding digital audio
13 S/PDIF OUT
output (e.g. amplifier, audio system).
Connect to an audio receiver (e.g. amplifier, audio system) for
14 Audio OUT de-embedding analog audio output using the phoenix
connector provided.
15 RS232 For device control or bidirectional RS232 pass-through.
2
Receiver
9 12
10 11 13
(us)
(us)
15
14