Silca Easy Scan Plus Guía De Utilización Del Software página 25

Air4
Remotes Programming Software
INSERTING, REPLACING AND RECHARGING THE BATTERIES
- INSERTING & REMOVING
To insert or remove the batteries, slide the battery compartment lid and lift it up (Fig.2 - E).
Insert the batteries the correct way around, as indicated on the bottom of the compartment, then close the
cover.
- REPLACING
Replace the batteries with rechargeable batteries which have the same characteristics as those supplied with
the Easy Scan Plus: rechargeable AA 1.2V
- RECHARGING
Easy Scan Plus can recharge the batteries:
1. By connecting the device to a computer via the USB cable provided (a USB 2.0 port with a 0.5 A current
capacity must be used).
2. By connecting the device to a battery charger with a Micro-B USB connector (not supplied) which has
the following characteristics: 5.0 VDC output voltage and 0.5 A minimum amperage, compliant to CE
norms.
FIRE DANGER:
WHEN RECHARGING BATTERIES WITH A SEPARATE POWER KIT, TAKE CARE TO USE
CHARGERS WITH THE FOLLOWING CHARACTERISTICS:
- MAXIMUM OUTLET CURRENT 8A
- MAXIMUM OUTLET POWER 100VA
Tips to increase the life of the batteries:
• If the device is not used for a long period of time, remove the batteries and store them in a safe, cool and
dry place.
• To extend the life of the batteries, avoid leaving the device connected to the USB port for long periods of
time once the batteries have finished charging.
IMPORTANT NOTE: THERE IS A RISK OF EXPLOSION IF INCORRECT OR DAMAGED BATTERIES
ARE USED (E.G. IF THERE IS OXIDATION, LIQUID LOSS OR DEFORMATION).
1800÷2400 mAh nickel-metal hydride batteries (NiMH).
Copyright Silca S.p.A 2020
English
25