Silca Easy Scan Plus Guía De Utilización Del Software página 22

Air4
Remotes Programming Software
Opens the following saved window:
Fill in the fields of the window which opens:
Saves the remote control data to the User Database;
Exits the feature.
Indicates the procedure
that must be performed
to activate the remote
control in the control
unit. Press the icon to
access the instructions
in PDF format
PLEASE NOTE:
WHEN THE REMOTE CONTROL HAS BEEN COPIED, SILCA RECOMMENDS THAT YOU CHECK THAT
THE COPY WAS SUCCESSFUL.
Select "Check Copy" from your Easy Scan Plus device menu and follow the instructions on the display.
Main menu
Identification
Copy check
Frequency meter
Antenna Tuning
Options
(ENT) to continue
Note: in Stand alone (only for Easy Scan Plus) it is not possible to check the copy for remote controls copied
in the On Line mode.
22
No procedure is required to activate the remote
control in the control unit (the remote control is
ready for use)
manual procedure to activate the radio control in
the control unit
simplified procedure to activate the radio control
in the control unit
no data is saved
a PDF file is created containing the user information of the various
buttons and procedures required
allows you to check if the buttons have been copied correctly
Copyright Silca S.p.A 2020
English