DJ Bank QRG
About This
Guide
Disclaimer
Limited
Warranty
Safety Notes
The DJ Bank Quick Reference Guide (QRG) has basic product information
such as mounting and auto program options.
The information and specifications contained in this QRG are subject to
change without notice.
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND
CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico:
https://www.chauvetdj.com/warranty/ For Customers in the United Kingdom,
Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: https://www.chauvetdj.eu/warranty/.
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for the period specified in, and subject to the
exclusions and limitations set forth in the full limited warranty on our website.
This warranty extends only to the original purchaser of the product and is not
transferable. To exercise rights under this warranty, you must provide proof of
purchase in the form of an original sales receipt from an authorized dealer that
shows the product name and date of purchase. THERE ARE NO OTHER
EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific
legal rights. You may also have other rights that vary from state to state and
country to country. This warranty is valid only in the United States, United
Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany and Mexico. For warranty terms in other countries, please consult
your local distributor.
These Safety Notes include important information about installation, use,
and maintenance.
·
This product is not intended for permanent installation.
·
ONLY connect this product to a grounded and protected circuit.
·
Always disconnect from power before cleaning or replacing the fuse.
·
DO NOT look at the light source when the product is on.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect this product from power cord by pulling or tugging on
the cord.
·
When mounting this product overhead, use a safety cable.
·
DO NOT allow flammable materials close to the unit while operating.
·
DO NOT touch this product when it is operating because it may be hot.
·
The voltage of the outlet to which you are connecting this product must
be within the range stated on the decal or rear panel of the product.
·
This product is for indoor use only! (IP20) To prevent risk of fire or
shock, do not expose this product to rain or moisture.
·
Always mount this product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the unit's housing are blocked.
·
Never connect this product to a dimmer or rheostat.
·
Replace the fuse with the same type and rating.
·
ONLY use the hanging/mounting bracket or the handles to carry this
product.
2
EN