Tabla de contenido
Idiomas disponibles
Idiomas disponibles
F
5. Insert two Barrel Nuts (5) into each end of the Riser Top (B) and Upper Back Panel (C) as shown.
6. Bolt the previous assembly between the Riser Side Frames (F) using the 60 mm Bolts (7) through the
mounting holes and screw into the inserted Barrel Nuts (5).
F
C
7. Glue two Wood Dowels (3) into the bottom of Upper Back Panel (C) and attach the assembled riser to
the Desk Top (A) with four 30 mm Bolts (8) and securely tighten with the provided hex wrench.
Assembly Instructions
B
C
3
A
8
8
F
F
7
B
F
C
8
B
5
C
5
F
A
Tabla de contenido
