DJO Donjoy IceMan CLEAR3 Instrucciones De Uso página 8

OPERATING INSTRUCTIONS
1
Add ice to fill line inside the device .
2
Add cold water to fill line .
3a. CLEAR
making sure the lip inserts into the groove .
Then press the lid down to close and secure .
3
3b. CLASSIC and CLASSIC
handle down, place lid on device making sure
the label is facing up . Secure the lid by raising
the handle, which will enage the lid locking
mechanism .
Connect the IceMan® hose to the cold pad
4 hose . To ensure a reliable connection, "snap"
or "click" hoses together into place so that
the fit is tight and snug .
To turn the device on, insert cord into con-
nection on the back of the device and plug
power supply into the wall outlet . (To turn
off the device unplug it .) WARNING! When
applying the cold pad, DO NOT let any part
of the cold pad touch your skin . Always use
5
with a barrier between your skin and the cold
pad . Apply cold pad to patient . Refer to ap-
plication instructions provided with cold pad .
Check for moisture on the barrier between
the patient's skin and cold pad . If moisture is
present on the barrier, immediately discon-
tinue use of this device .
For IceMan® CLASSIC
Set temperature control on the hand console
starting at the white dot . Allow 10 minutes
6
after the cold pad is placed on the patient for
the temperature to stabilize . Then adjust the
temperature to the range prescribed by the
physician .
DO NOT use if you do not have a prescription .
3 Lid – Place lid on the device
Lid – With the
3
7
3a 3b
10
minimum cold
maximum cold