Tabla de contenido
Idiomas disponibles
Idiomas disponibles
In heating, make sure the temperature setting is above the
room temperature and the flame
In cooling, make sure the temperature setting is below the
room temperature and a solid snowflake
display (T8775C only).
NOTE:
If a call for cooling is made before the compressor has
been off for five minutes, or if a power interruption
occurs while the compressor is running, the thermostat
will go into a five-minute delay to protect the compres-
sor. The snowflake
Check the system fuse or circuit breaker and replace or reset if
necessary.
Check for air movement at the register.
If you have questions concerning this thermostat, call Honeywell
Customer Care at 1-800-468-1502.
69-1679ES—1
is present in the display.
will flash during this delay.
6
is present in the
Tabla de contenido
