Trust START-LINE AYCT-202 Manual Del Usuario página 4

AYCT-202 REMOTE CONTROL
EN
1. Buttons
ON button to turn your lights/devices ON
OFF button to turn your lights/devices OFF
Dim up to increase the light brightness. Keep pressed for continuous dimming
Dim down to decrease the light brightness. Keep pressed for continuous dimming
Bulb selection. Press repeatedly to cycle through the bulb channels. The group channel
can be used as a 5th channel or for other functions used by for example the APA-3
1500R.
Press the smart group button to control all bulbs simultaneously
2. Remove pull strip
A
Remove the battery pull strip by pulling it from the remote control. Only after removing the pull
strip the remote can be used.
3. Pair remote with bulb
A First select the channel you want to control the bulb with using the bulb selection button.
B Put the receiver in learn mode (Refer to the receiver manual on how to put it in learn mode)
C
Press the ON button on the remote. It is also possible to pair multiple receivers to one channel.
4