Safety Information; Important Safety Instructions - HAMPTON BAY SL12-6 Manual De Uso Y Cuidado

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
□ Do not use these products outdoors unless marked suitable for
outdoor use.
□ When products are used outdoor applications, connect the
product to Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper
installation.
□ Do not mount or place near gas or electric heaters, fireplace,
candles, or other similar sources of heat.
□ Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails. Install only using the mounting
means provided.
□ Do not let lamps rest on the supply cord or on any wires.
□ Do not hang objects from the cord, wire, or light string.
□ Do not use this product for other than its intended use.
□ Do not close doors or windows on the product or extension
cords as this may damage the wire insulation.
□ Do not cover the product with cloth, paper or any material not
part of the product when in use.
□ Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE INSTRUCTIONS
CAUTION:
To reduce the risk of fire use only type S lamps,
2 watts maximum.
To reduce the risk of fire do not deliberately reposition
either lampholder contact.
Flame Bulb Function:
1. The default setting is flame effect light.
2. Toggle your light switch OFF and ON within 2 seconds to switch
between flame effect light or steady light.
3. If multiple lights are not displaying the same setting, toggle
your light switch OFF then ON after 5 seconds, the display will
set back to default setting.
Before returning to your local Home Depot, please call our Customer Service team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Please reference your SKU (1004-762-975 12 FT LED STRING LIGHT).
CAUTION:
Do not use with extension cord near water or where
water may accumulate.
Keep lamps at least 16 feet (4.88m) from pools and spas.
Keep plugs and receptacles dry.
Do not submerse.
WARNING: RISK OF ELECTRIC SHOCK
Disconnect power at the source prior to wiring,
re-lamping or servicing in any way. The light string kits
are supplied with an attached three prong plug that will
only fit into a three prong outlet. Do not alter the plug.
The lighting string is rated at 120V, 60Hz, 12 Watts.
It is provided with 6 lampholders and 2 Watt S Type lamps.
CONNECTING MULTIPLE SETS
USING LED BULBS INCLUDED
Maximum Wattage Range
2 watts
One bulb is 2W, 6 sockets per string light.
Total power is 2*6 =12w for one string.
Max wattage is 432W, 432/12 = 36 sets
You can link up to 32 sets of string lights
DO NOT EXCEED 432 WATTS
Add wattage of all light strings together for a total of 432 Watts
or less.
When connecting multiple sets protect connection(s) from
direct exposure to rain and water. Do not allow connection(s) to
become wet.
CONNECTING MULTIPLE SETS OF LED BULBS
Maximum Wattage
2w
5w
7.5w
10w
15w
2
Please contact 1-855-HD-HAMPTON for further assistance.
RISK OF ELECTRIC SHOCK
Number of String Lights
36 sets
Number of String Lights
36 sets
14 sets
9 sets
7 sets
4 sets
HAMPTONBAY.COM