Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Rear Panel

1.
USB Port: When connected to a
computer, the USB port delivers power
to the keyboard and transmits MIDI
data.
2.
Sustain
Pedal
accepts
a
momentary-contact
pedal (not included). When pressed, the
pedal by default will sustain the sound
you are playing without you having to
keep your fingers pressed down on the
keys. The sustain pedal input can be
remapped to perform a custom MIDI
assignment.
Note: The polarity of the sustain pedal is determined by the keyboard upon startup. When
an Oxygen Pro Mini keyboard is powering up, the sustain pedal is assumed to be in the
"up" (Off) position. It is important that the sustain pedal is not in the down position before
starting up the keyboard, as the pedal will then operate in reverse, and notes will sustain
when the pedal is not pressed.
3.
MIDI Out: Use a 1/8" TRS to 5-pin MIDI cable (sold separately) to connect this port to a
hardware synth or other MIDI device.
Note: The MIDI output port can send MIDI from the Oxygen Pro Mini, your connected
computer, or both. Go into the Global Settings to set what is sent to the MIDI Out.
12
Input:
This
input
foot
Tabla de contenido
loading

Tabla de contenido