Tabla de contenido
Idiomas disponibles
Idiomas disponibles
* 20 Amp measurement for 30 seconds maximum.
Ohms can not be measured if voltage is present, ohms can be measured only in a non-powered
circuit. However, the meter is protected to 600 volts.
Getting Started
his chapter will help you get started. It describes the basic functions of the Meter.
Meter Basics
1. Digital LCD display
Display features:
1a. Symbols to identify function
1b. Four character digital display
The digital display is best for stable input. The bar graph is best for rapidly
changing input.
2. Function buttons
Press the button to select a function. A symbol will display to verify your
choice.
3. Rotary Selector Switch
Turn this switch to select a function or turn the meter OFF.
4. Volts Terminal
The Red test lead is used to
measure Amps, Volts, Ohms,
TEMP, Hz, RPM, Cap, mS and
Dwell.
The Black test lead is used
in the Common(COM) terminal for all tests
Function
DC/AC Volts,
Ohm/Continuity
/Diode,CAP.,IR-
TEMP.
Adaptor,
Type-K
TEMP.,Hz,%Duty,
Ms Dwell, RPM
AC/DC μ A mA
AC/DC20A
Terminal
Input limit
V-Ω -RPM
600VoltsAC DC
400mA DC/AC
μ A / mA
20A
*20A DC/AC
Ω
Ω
1a
1b
2
3
4
Tabla de contenido
