Reese Explore 1395800 Guía De Instrucciones página 3

ASSEMBLY INSTRUCTIONS
Attach Tray Halfs to End Plates and Center Shank
1. Place (1) tray half between the end plates. Insure reflector is facing
rearward. Align holes as shown and loosely secure with ¼-20x3/4"
carriage bolts, ¼-20 lock nuts and ¼" washers. FIG 2.
2. Secure the other tray half in the same manner.
3. Once all items are positioned properly, tighten all ¼-20x3/4"
carriage bolts to 175 in-lbs.
Installing Center Cover Plate
1. Install center cover and secure with 3/8-16x3" carriage bolts,
3/8-16 lock nuts and 3/8" washers. FIG 3.
2
End Plate
3
Center Plate
PAGE 3 1395800_IN Rev A • Questions? (800) 234-6992 • ReeseBrands.com
½ Tray
Carriage Bolt,
¼-20 x 3/4"
Carriage Bolt,
3/8-16 x 3.00"
Flat Washer, 3/8"
Lock Nut, 3/8-16
Reflector