Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ATTACHING CASTERS
13.Put caps #15 into ends of caster
beams #12 (see Detail G).
14 . A ttach one non-locking caster #13
and one locking caster #14 to each
caster beam #12 with push nuts #17.
(See Detail G). Note: Use a hammer
to tap push nuts onto casters
securely.
15. Attach caster beams to upright assemblies #11 with
bolts #25, washers #23, and spacer bushings #19.
NOTE: Spacers bushings #19 slide INSIDE caster
beams #12 to keep beams from crushing. (See Detail H).
Tighten bolts #25 tight.
16. Lock both locking casters #14.
(See Below). NOTE: Casters
should always be locked unless
moving table.
To Lock
Turn
Counter-
Clockwise
To Unlock
Turn
Clockwise
6
Detail G
Detail H
Tabla de contenido
