Installing Power Button Assembly - Dell Latitude 12 Manual Del Propietário

NOTE: Power button assembly bus cable is routed between the square gap in the power button bracket.
f. Release the adhesive tape that secures the power button assembly.
g. Push and release the power button assembly from the chassis by a plastic scribe [4].
h. Lift and remove the power button bracket together with the power button assembly.
NOTE: Power button is encapsulated within a power button bracket.

Installing power button assembly

1. Assemble the power assembly button with the power button bracket.
NOTE: Ensure that the power button cable is routed between the square gap in the power button bracket.
2. Push the power button assembly in the slot on the tablet chassis.
NOTE: Ensure NOT to insert the power button from the exterior right view.
3. Secure the power button assembly with the adhesive tape.
4. Replace the screw to secure the power button assembly to the tablet chassis.
5. Connect the power button assembly cable, and close the latch on the system board.
26 Extracción e instalación de componentes