3
A.
1
3
B.
INSTALL THE TRIM
Secure the escutcheon (1) and backplate (2) to the bracket with the two screws (3) provided
A.
as shown.
Place trim sleeve holder (1) onto the cartridge, and slide the trim sleeve (2) over the holder
B.
and cartridge.
Slide the trim ring (1) over the trim sleeve as shown.
C.
2
C.
4
INSTALL THE VOLUME HANDLE
Make sure cartridge is off by turning it clockwise until it stops.
Place volume control handle (1) onto the cartridge so the
lever (2) is pointing at approximately 120 degrees as shown.
Place the lock washer (3) onto the cartridge and secure the lock
washer and handle with nut (4) and wrench (5) provided.
6
46383
Rev. B
