Idiomas disponibles
Idiomas disponibles
ENG
CF02 Full-Face Mask
2. Use and limitations on use
•
Use
The CF02 full-face mask protects face and respiratory tract. Depending on the filter used it
protects the user in an environment contaminated with solid and liquid aerosols, gases, vapours and
combinations of these dangerous substances.
It can also be used in combination with CleanAIR
manual for future reference.
•
Limitations on use
Carefully observe the following instructions.
DANGER
1.
Never use the mask in the following environments and under the following conditions:
• If oxygen concentration in the environment is lower than 17 %.
• In oxygen ambiances and oxygen-enriched environments.
• In explosive ambiences.
• In environments where the user lacks knowledge about the kind of dangerous substance and its
concentration.
• In environments that represent an immediate threat to the life and health.
• Unknown type and concentration of the gases or vapours in the environment.
• In environments with various mixes of gases and vapours.
2.
Do not use this product before carefully reading this manual. If you have any questions, please
contact the manufacturer or your distributor.
4
Instructions for use
Powered Air Purifying Respirator units. Keep the
®
Instructions for use
WARNING
1.
Do not modify or distort the mask and refrain from exerting excessive force on the mask.
2.
Do not disassemble or modify the face parts.
3.
Use only original spare and consumable parts.
4.
Do not use if:
• You have a beard, hair or sideburns reaching into the sealing line of the mask. The requested
protection function of the mask cannot be achieved under such circumstances.
• You are in a poor physical condition.
5.
Individuals with respiratory or circulatory system disease should consult a physician and go
through a medical examination before use.
6.
Give your attention to checking the product before use.
7.
Perform an air-tightness test whenever putting on the respirator.
8.
Do not insert towels or any other objects that could cause air-tightness disruption in the space
between the face and the mask sealing line.
9.
If any of the following problems occur when using the mask, move to a secure location and take
appropriate measures:
• Resistance to breathing increased significantly or you have problems with breathing.
• If you experience stench or irritation or an unpleasant taste while breathing.
• If you feel unwell or if you experience nausea.
10. Use only authorized CleanAIR
filters suitable for the particular application. Particle filters do
®
not protect the user against gases and vapours. Gas filters do not protect the user against
any particles. Use combined filters in case of contamination by both kinds of dangerous sub-
stances.
11.
Do not use filters with expired shelf lives. (see section „11 Shelf life").
12. Do not use filters that are damaged, malformed, corroded or otherwise.
NOTICE
1.
In case of allergic reactions (i.e. rash, redness, itching, etc.) while using this product stop using
it and consult a dermatologist.
2.
This product is intended to be used in environments with temperature range from -5 °C to +50 °C.
•
Standards
This product conforms to:
EN 136:1998/AC:1999-12
CL3.
EN 12942:1998/A2:2008
TM3
Notified person for the CE approval:
Výzkumný ústav bezpečnosti práce, v.v.i.
Jeruzalémská 1283/9, 110 00 Prague 1, Czech Republic
Notified person 1024
Declaration of Conformity is available at:
https://www.clean-air.cz/doc
CF02 Full-Face Mask
ENG
5
Capítulos
