Kask PLASMA AQ Uso Y Cuidado página 9

Pictures and/or description of internal labels:
1
2
3
VERY LOW TEMPERATURE -30 ° C
4
MOLTEN METAL SPLASHES (MM)
5
1
2
SAFETY HELMET FOR INDUSTRY, WORK
3 AT HIGH ALTITUDES AND IN EMERGENCY
AND RESCUE HEALTH SERVICES
4 EN 397 | -30°C | LD | MM
5
Safety helmet for industrial use, altitude works and sanitary service of emergency and aid. For adequate
protection this helmet has to fit or to be adjusted to the size of the user's head. The helmet is made to
absorb the energy of a blow by partial destruction or damage, and even though such damage may not
be readily apparent, any helmet subjected to severe impact should be replaced. The attention of the
user is also drawn to the damage of modifying or removing any of the original component parts of the
helmet, other than as recommended by the helmet manufacturer. Helmets should not be adapted for
the purpose of fitting attachments in any way not recommended by the helmet manufacturer. Do not
apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from
the helmet manufacturer. For cleaning, maintenance or disinfection, use only substances that have no
adverse effect on the helmet and are not known to be likely to have any adverse effect upon the wearer,
when applied in accordance with the manufacturer's instructions and information.
Note only for page layout: Enter on the last page detail table sizes and weight.
EXPLANATORY MARKING DIAGRAM
MANUFACTURER
MODEL NAME
MODEL DESIGNATION
REFERENCE STANDARDS
SIDE DEFORMATION (LD)
SIZE IN CM.
LABELLING REPRODUCTION
KASK
PLASMA WORK
ADJUSTABLE 51-63 CM
LABELLING
6
CERTIFICATION MARKING
7 TESTING BODY IDENTIFICATION
8 DATE OF MANUFACTURE
9 IDENTIFICATION NUMBER
10
6
7
8
9
10
EN
HELMET WEIGHT
NUMBER
SHELL MATERIAL
390 gr
0426
06.2014
14.0000.0001
PP