Menu Description; Using The Control Panel - CASATELLI LEONARDO 8ET Generalidades - Advertencias - Instalación - Mantenimiento

9.1.2 Menu description

ICON FUNCTION
Power
Setting the operating power
Ventilation
Fan speed setting of the ambient air.
*(where
included)
Displays the room temperature reading and allows you to set the desired
Temperature
temperature.
Fuel
Function not used
It enables or disables the Timer. When it is enabled, the
Timer
displayed
ICON FUNCTION
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
Set-up
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[30]
[31]
[40]
[30] [40]
The submenus and
assistance centre.

9.2 USING THE CONTROL PANEL

• Use the arrow keys to move between the different menus that light up from time to time.
• Hover over a specific function and press the
• Pressing the key
• In general, all flashing values can be changed using the
• The "cancel" key discards the change; if it is pressed and held down, any alarm code or error will be
displayed on the screen.
DESCRIPTION
SUBMENU
Assigning of programs (max 3) to the various days of the
Weekly timer
week
Programs Programs setting menu
Clock/date Clock and date setting
It displays
Remaining hours maintenance. The value "Hi" indicates a number greater than
999 hours.
System information It displays the current software version
Function not enabled
Enables or disables the Eco Mode which automatically
Eco Function switches off and on depending on the room temperature
(only in configuration 1).
Degree difference compared to the switch-off temperature,
Re-ignition delta
below which the stove re-ignites (except in configuration 1).
Anti-freeze
Minimum temperature below which the stove ignites (only in
configuration 1).
temperature
Keypad lock It sets the key lock mode
Display brightness It sets the degree of display brightness
Display mode It sets the data display mode
Buzzer volume It sets the acoustic warning volume
Combustion You can set 3 different combustion configurations
Function not enabled
Installer Menu It modifies/displays the stove configuration
Manual auger load (Where included) Manual activation of the pellet loading system
Service menu Assistance centre menu
of the Set-up menu are password protected and are for the exclusive use of the technical
again confirms the change.
004778330 - 16/07/2020
fixed icon
will be
DESCRIPTION
the hours remaining until
key to change the values with the
keys.
VALUES
1..5
OFF*,1..5; Auto; Hi
6°C .. 51°C
ON - OFF
VALUES
[d1] ... [d7]
[P1] ... [P6]
recommended
OFF; Eco
0.5 ... 5.0°C
OFF; 3 ... 20°C
OFF; Lo; Hi
OFF; 1 ... 5
OFF; 1 ... 4
OFF; 1 ... 5
1 ... 3
PWD: "54"
PWD: "54"
keys.
41