Product Description And Specifica- Tions; Before Use - Casals VT50REA Manual De Instrucciones

- Do not allow the power cord to hang or to come
into contact with the hot surfaces of the battery
charger.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Use clamps or a vise to secure the object to be
worked in place. The work will be safer if both
hands are free to control the tool.
- Do not touch any of the appliance's moving
parts while it is operating.
- Fully unroll the appliance's power cable before
each use.
- Keep hands and other body parts well away
from the work area whist the tool is in use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories or
consumables attached to it are defective. Repla-
ce them immediately.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance is intended for adult use. Ensure
that this product is not used by the disabled,
children or people unused to its handling.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
- Do not expose the appliance to extreme tempe-
ratures.
- Do not expose to extreme temperatures or
strong magnetism.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Always check the workpiece before operation
and remove any obstructions such as nails,
staples, screws, string, rags, cloths and other
debris.
- Only use the appliance for carrying out dry
tasks.
- Do not use the appliance on any part of the
body of a person or animal.
- Let the appliance running with no load for 30
seconds in a safe position. If you notice serious
vibration or other defects stop the appliance
immediately. Then check the problem and /
or proceed as we describe on Anomalies and
Repair clause.
- The appliance can be used on surfaces such as:
wood, cardboard, plastic, plaster, etc.
PRODUCT DESCRIPTION AND SPECIFICA-
TIONS
DESCRIPTION
A Variable speed button
B Start-up switch
C Locking button
D Rotation direction switch
E Drilling/Impact Drilling Selector
F Drill chuck
G Auxiliary handle
H Depth stop
I Cooling vents
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has
been removed.
- Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
- Before using this product for the first time, it is
important to make a full charge of batteries.
- Prepare the appliance according to the function
you wish to use:
AUXILIARY OPERATION
- When working always use the auxiliary handle
(G).
- The depth can be set with the depth stop (H).
Thereby loosen the winged screw by turning the
auxiliary handle (G) counter clockwise.
- Set de required drilling depth.
- Tighten the winged screw by turning the auxi-
liary handle (G) clockwise.
INSERTING A BIT:
- To open the drill's chuck (F), whilst completely
switched off, take firm hold of the back part of
the chuck and turn the front part of the chuck
counter clockwise.
- Insert the drill bit, screwdriver bit, or other tool/
accessory required for the task, into the chuck.
In order to obtain a secure fastening of the bit,