Steren MUL-015 Manual Del Usuario página 3

DC CURRENT
Overcharge protection: 200mA 250V fuse (in the range of 10A
without funding)
RESISTANCE (Ohms)
Maximum voltage in an open circuit: 2,8V
Overcharge protection: maximum 15 seconds at 220V rms, in all
ranges
HOW TO USE
WARNING
1.- Never do measures higher than 500V, in order to avoid
accidents.
2.- Make sure that the testing points are in good conditions
MEASURING METHODS
DC / AC VOLTIMETER
1.- Connect the red lead to VΩ mA, then connect the black lead
to "COM".
2.- Place the rotary switch in VDC or VAC position. If the voltage
is unknown at the moment to be measured, place the selector
in the highest range and while measuring reduce the range until
you get the right value.
3.- Connect the testing leads to the device or circuit to be
measured.
4.- Turn the device or circuit on, the value of the voltage will be
displayed in the screen.
ENGLISH-3