Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Start your sander before sanding and turn it off
only after you stop sanding. For the best results,
sand wood in the direction of the grain.
Do not start sanding without having the
sandpaper fitted.
Do not allow the sand paper to wear away it will
damage the base-plate. The guarantee does not
cover base-plate wear and tear.
Use coarse grit paper to sand rough surfaces,
medium grit for smooth surfaces and fine grit for
the final surfaces. If necessary, first make a test
run on scrap material.
Use only good quality sand paper.
The sand paper controls the sanding efficiency,
not the amount of force you apply to the tool.
Excessive force will reduce the sanding efficiency
and cause motor overload. Replacing the sand paper
regularly will maintain optimum sanding efficiency.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling advice.
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 12
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1.Misuse, abuse or neglect.
2. The tool has not been used for rental
purposes.
3.Repairs attempted by unauthorised repair
centres.
4.Damage caused by foreign objects, substances
or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígon Industrial Nord-Est 08740
Sant Andreu de la Barca Barcelona-España
DECLARATION OF
CONFORMITY
We
EHLIS S.A.
NIF. A-08014813
c/. Sevilla s/n. Polígon Industrial Nord-Est
08740 Sant Andreu de la Barca
Barcelona-España
Declare that the product,
Description Random Orbital Sander
Type CES18G.9 (CES-designation of
machinery, representative of Sander)
Function Remove surface material using an
abrasive medium
Complies with the following Directives,
2006/42/EC, 2014/30/EU,
2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1, EN 62841-2-4, EN 55014-1,
EN 55014-2
Date:10/12/2019
Company name: Ehlis S.A.
CEO: Alejandro Ehlis
41
Tabla de contenido
