CASUALPLAY Multiprotector Fix Instrucciones página 22

Assembling the MULTIPROTECTOR FIX
The MULTIPROTECTOR FIX is supplied dismantled making it easier to
•
transport (fig.1)
Position the backrest so that the metal structure of the MULTIPROTECTOR
•
FIX goes into the clip (fig.2-3), never behind it (fig.4). It will click when
correctly in place.
WARNINg: Never use the MULTIPROTECTOR FIX without its backrest as it
has been approved for use with the backrest in place. If it is used without the
backrest, the child's safety will be affected.
MULTIPROTECTOR FIX connector folding mechanism
NOTE: The FIX connectors of the MULTIPROTECTOR FIX child restraint
system can be folded.
Press the red button and gently lift it to release the fastening mechanism.
•
Keeping it pressed (fig.5), turn either of the 2 connectors downwards.
Release the button and continue turning (
•
the maximum folding position (180º), the mechanism will lick locked again.
To unfold the connectors again, repeat the same operation until they click
•
into place again.
NOTE: The MULTIPROTECTOR FIX can be installed on the front passenger
seat or on the back seat of the vehicle, with the three-point seat belt of the
vehicle and the option of the FIX connectors.
Installing the MULTIPROTECTOR FIX when the vehicle is fitted with ISOFIX
fasteners
Remove the headrest from the seat on which the child restraint system is
•
going to be installed (fig.7).
Position the clips in front of both ISOFIX slots, which are situated between
•
the seat and the backrest (fig. 08).
NOTE: If the vehicle came supplied with these connectors, it is not necessary
to assemble them.
20
fig.6). When the connectors reach