Idiomas disponibles
Idiomas disponibles
6/8
5. Remove the STD bolts (C) and
the STD plate (D).
NOTE: The STD bolts (C) and the
6. Install the Center Stand Plate
G by using the Bolts H.
7. Pass the hose as shown in the
figure.
NOTE:
•
To prevent from turnover the
vehicle, lose the STD side
stand bracket bolt (E) before
mounting with a jack because
the bolt is tightened as high
torque.
•
Before operation, make sure
stability of the vehicle.
8. Lose
bracket bolt (E) once and place
the vehicle on the level ground
with a jack.
9. Remove the STD side stand
bracket bolt (E).
NOTE: The
GENUINE SUZUKI ACCESSORIES
STD
plate
(D)
reused.
H :
Bolt
50 N·m (5.1 kgf-m, 37.0 lbf-ft)
the
STD
side
STD
side
bracket bolt (E) is reused.
aren't
(D)
stand
stand
(C)
(E)
