Idiomas disponibles
Idiomas disponibles
4/8
Tighten bolts to the torque indi-
Tightening
Torque
cated in the right table as standard
value unless otherwise explicitly
specified.
The value shows conventional or
"4" marked bolt tightening torque.
For other bolts not listed in the
table, refer to the service manual.
1. Remove
Installation
mounting bolt (A) and nut (B).
NOTE:
•
The STD nut (B) is used for
installation of the Bracket (R)
3.
•
The STD engine mounting bolt
(A) isn't reused.
GENUINE SUZUKI ACCESSORIES
the
STD
engine
Tightening Torque
Diameter
(mm)
N·m
5
3.0
6
5.5
8
13.0
10
29.0
(B)
kgf-m
lbf-ft
0.3
2.0
0.55
4.0
1.3
9.5
2.9
21.0
(A)
(A)
