Safety Information; User Interface And Navigation; Display Description - Hach 5500sc PO4 3– HR Manual Del Usuario

Table of contents
User interface and navigation
Startup on page 6
Set up the reagents and standards
Measure a grab sample or standard
Set up the system on page 9

Safety information

Refer to the installation user manual for general safety information, hazard descriptions and
precautionary labels descriptions.

User interface and navigation

Keypad description
Refer to Figure 1 for the keypad description and navigation information.
Figure 1 Keypad description
1 Display
2 Navigation keys RIGHT, LEFT: switch
measurement displays, select options, navigate
data entry fields
3 Navigation keys UP, DOWN: scroll menus, scroll
measurement channels, enter numbers and letters
4 Home: go to the main measurement screen
5 Enter: confirm and open sub-menus

Display description

Refer to Figure 2 for the measurement screen descriptions. Refer to
descriptions.
on page 3
on page 8
on page 8
Configure the outputs on page 11
View data on page 15
Use an SD card on page 17
Calibration on page 17
6 Diag: enter the DIAG/TEST MENU
7 Cal: enter the CALIBRATE MENU
8 Back: go back to the previous menu
9 Menu: select options from the analyzer main menu
Figure 3 for the system status
English 3