Installation; Installing The Escutcheon - Glacier bay 67405-1001 Guía De Uso Y Mantenimiento

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: This step is
If the escutcheon will be used, install the faucet assembly
as described in step 2.
□
Shut off the water supply. Remove the old
faucet.
□
Insert the faucet body through the hole in the
sink.
for no escutcheon installation (optional).
A
2

Installing the escutcheon

NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Screw the shanks (E) into the escutcheon (C)
and ensure that the base plate (D) is pressed
onto the escutcheon (C) before the escutcheon
(C) is installed over the three holes in the sink.
□
From underneath sink, secure the escutcheon
to sink with the easy install nuts (F) provided.
Push up the easy install nuts (F) to sink and
hand-turn to tighten, as shown in the Fig 1.
NOTE: If the sink is uneven, use silicone under the base
plate (D).
F
Sink
Push
up
4
C
E
D
Screw
Sink
F
Fig 1