Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product:
Ensure that all parts are present. Compare parts with the package contents list. If any part is missing or
damaged, do not attempt to install the product. Contact customer service for replacement parts.
Turn off the cold and hot water lines and turn on the old faucet to release built-up pressure.
When installing your new faucet, first hand-tighten the connector nuts. Then use one wrench to hold the
fitting and a second wrench to tighten the nut an additional 1/4 trun. Connections that are too tight will
reduce the integrity of the system.
TOOLS REQUIRED
Adjustable
Wrench
Silicone
Caulk
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
AA
Hex wrench (H2.5 * 45mm L * 70mmL)
BB
Hex wrench (1*H2.5*53L)
CC
Aerator wrench
AA
Safety
Goggles
BB
Quantity
1
1
1
3
Please contact 1-855-434-5224 for further assistance.
Phillips
Screwdriver
CC
HOMEDEPOT.com