Panasonic CF-VVK33 Serie Instrucciones De Funcionamiento página 3

Declaration of Conformity with the requirements of the E-Waste (Management) Rules
The Product is in conformity with the requirements of the reduction of hazardous substances of the E-Waste
Rules.
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the E-
waste Rules:
1. Lead (Pb) - not over 0.1% by weight;
2. Cadmium (Cd) - not over 0.01% by weight;
3. Mercury (Hg) - not over 0.1% by weight;
4. Hexavalent chromium (Cr6+) - not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) - not over 0.1% by weight;
6. Polybrominated diphenyl ethers (PBDEs) - not over 0.1% by weight.
For the purpose of recycling to facilitate effective utilization of resources, please return this
product to a nearby authorized collection center, registered dismantler or recycler, or Pana-
sonic service center when disposing of this product.
Please see the Panasonic website for further information on collection centers, etc. , or call
the toll-free number below.
Website:
https://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html
Service helpline: 1800 103 1333 or 1800 108 1333
Do's & Don't: - E-Waste (Management ) Amendment Rules 2018
S.No.
1 All electrical and electronic products are required
to be handed over only to the Authorized recy-
cler.
2 The product should be handed over only to au-
thorized recycler for disposal.
3 Keep the product in isolated area, after it be-
comes non-functional/un-repairable so as to
prevent its accidental breakage.
4 For more information about collection and recy-
cling, please contact your local municipality.
5 Always Dispose products that have reached
end-of life at Panasonic India authorized service
center.
6 Wherever possible or as instructed, separate
the packaging material according to responsible
waste disposal options and sorting for recycling.
7 Create environment awareness PAN India Level. Do not dispose your product in garbage bins
Interface Cable
Use of an interface cable longer than 3 m is not recommended.
<Only for model with external antenna>
When using Port Replicator or Car Mounter on which an external antenna can be installed:
External antenna for wireless LAN must be professionally installed.
The gain of external antenna for wireless LAN must not exceed 5dBi.
The user must maintain minimum of 20 cm spacing between the external antenna and all people (excluding
extremities of hands, wrist and feet) during wireless modes of operation.
For India
Do's Don't
The product should not be opened by the User
himself/herself, but only by authorized service
personnel.
The product is not meant for re-sale any unau-
thorized agencies/scrap dealer/kabariwalahs.
The product is not meant for mixing into house-
hold waste stream.
Do not keep any replaced spare part(s) from the
product in exposed area.
Do not donate old electronic items to anybody.
Do not give e-waste to informal and unorganized
sectors like Local Scrap Dealer/Rag Pickers.
along with municipal waste that ultimately
reaches landfill.
68-M-3
11-E-1
41-E-1
3