Maxon 297161-01 Manual De Instrucciones página 6

5. Disconnect ground cable from pump
mounting bracket (FIG. 6-1). Remove
existing grommet from pump mounting
plate (FIG. 6-1). Insert new grommet
(Kit item) into pump mounting plate.
6. Unbolt and remove pump cover
(FIG. 6-2).
7. Insert switch wiring through new grom-
met on pump mounting plate (FIG.
6-1). Then, connect the switch wiring
to the junction block as shown on the
next page in FIG. 7-1.
8. Reconnect ground cable to
pump mounting bracket (FIG.
6-1).
9. Bolt on the pump cover as
shown in FIG. 6-2.
© MAXON Lift Corp. 2018
LIFT CORPORATION Sht. 6 of 16 DSG#
M-16-17
BOLT
GROUND
CABLE
REPLACING GROMMET
BOLTING / UNBOLTING PUMP COVER
Rev. A Date: 08/01/18
FIG. 6-1
FIG. 6-2