Chapter 1. Foreword; Performances Of Packaging Machine; Machine Identification; Weight And Dimensions Of Packed Machine - Minipack-Torre Tunnel 50 Digit Instrucciones Para La Instalación, Uso Y Mantenimento

Chapter 1. Foreword

1.1. Preface
This manual has been drawn up in compliance with the UNI10893 standard dated July 2000. It is meant for all users in
order to enable them to use the machine correctly. Keep it in a place which can be easily accessed in the proximity of
the machine and which is known to all users. This manual is an integral part of the machine for safety reasons. We wish
to specify the symbols in use here below in order to improve their understanding.
ATTENTION:
Accident prevention rules for the operator. This warning indicates the presence of dangers which
can injure the person operating on the machine.
ATTENTION:
Hot members. It shows the danger of burning, thus involving the risk of a serious accident for the
exposed person.
WARNING:
It indicates the possibility of damaging the machine and/or its components.
All reproduction rights of this manual are reserved to the manufacturer. Partial or complete reproduction is forbidden as
provided by the law. Descriptions and pictures provided on this manual are not binding. Therefore the manufacturer,
reserves the right of making any change considered necessary. This manual cannot be transferred for viewing to third
parties without authorisation in writing of the manufacturing company. The machine must be used only for the purpose it
was built. Any other use shall be considered as "illegitimate use" and therefore dangerous. Before carrying out any
operation on the machine it is compulsory to read carefully all instructions provided on this manual, in order to avoid possible damage to the machine, to people and property.
Do not operate in case of doubts on the correct interpretation of the instructions.
Contact the manufacturer in order to obtain the necessary explanation.
Upon delivery check that the machine is complete in all parts.
Possible anomalies shall be immediately reported to the manufacturer.
The manufacturing company disclaims any responsibility in case of machine illegitimate use and/or in case of damages
resulting form operations carried out on the machine that are not mentioned in this manual.

1.2. Performances of packaging machine

You have bought a machine with outstanding features and performance and we thank you very much for your
confidence in choosing it. The system is unique in its kind and has achieved worldwide success with more than 70000
units operating in the field of packaging and wrapping.
The technological concept underlining its design, as well as the components and materials used in the manufacturing
and testing process are the best assurance of proper operation and long-lasting liability.

1.3. Machine identification

In every communication with the Manufacturer, always mention the model and the serial number specified on the plate
on the rear part of the machine (figure 1.3. page 51).

1.4. Weight and dimensions of packed machine

Tunnel 50 a = mm1390
Tunnel 70 a = mm2030

1.5. Machine weight and dimensions

Tunnel 50 a = mm1240
Tunnel 70 a = mm1900
b = mm910 c = mm1640
b = mm1220 c = mm1830
b = mm500 c = mm800
b = mm1000 c = mm1100
Weight = Kg193 (figure 1.4. pag.51).
Weight = Kg483 (figure 1.4. pag.51).
d = mm1450
d = mm1530
9
Weight =
Kg163 (figure 1.5. pag.51).
Weight =
Kg413 (figure 1.5. pag.51).