Installation - Glacier bay F51A0074CP Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply. Remove the old faucet.
Clean off the mounting surface.
Ensure the gasket (H) is on the bottom of the new
faucet (A).
Place the faucet (A) through the mounting holes in
the sink.
Secure the faucet (A) to the sink using the mounting
nuts (C) provided.
NOTE: If the sink is uneven, use silicone under the
gasket (H).
H
C
2
Use 1/2 in. I.P.S. faucet connections (1), or a 3/8 in.
O.D. ball-nose riser (2) with supply line coupling
nuts (3) (not included).
Use a wrench to tighten the connections. Do not
over tighten or torque the copper supply line.
A
4
Making the water supply
connections
2
1 1
3