CAUTION:
Select a suitable location for the fan. Always choose a safe location in
accordance to the safety recommendations outlined.
Please always ensure that the power cord does not hang where it can
accidentally be pulled and that the unit cannot accidentally fall.
Do not hang or mount the product on a wall or ceiling.
Before connecting the appliance, check if the voltage indicated on the rating
plate corresponds to electric Mains voltage in your home. Plug the power
cord into a suitable socket.
1. After connecting the fan to the mains with correct ratings, the power
indicator lights up.
2. Switch on the appliance by pressing the ON/OFF button once on the
control panel. The fan starts to blow at low speed. The low speed indicator
1 lights up. To switch off the fan, press the ON/OFF button again.
3. Press SPEED BUTTON repeatedly for desired wind speeds:
Low Speed ( Speed Indicator 1 lights up)
Medium Speed ( Speed Indicator 2 lights up)
High Speed (Speed Indicator 3 lights up)
4. For oscillation, press the SWING BUTTON. The Swing Indicator will light
up and the fan will start oscillating. To stop oscillation, press the same
button again.
5. The fan has a timer function. After having switched on the unit and
chosen the desired wind speed, press the TIMER BUTTON and the fan will
operate for desired time period. Press the TIMER BUTTON several times
and the setting will change with every button stroke. The chosen time
period will be indicated by the respective Time Indicator(s). When the set
time has elapsed, the fan will switch off automatically. The fan can be set
for different time periods from 0.5-7.5 hours, the sum of the illuminated time
indicators will indicate the time period which has been set.
6. The vertical air flow direction can be adjusted by tilting the entire motor
unit upward or downward. Loosen the neck screw (9) and adjust the motor
until the desired vertical angle is reached. Tighten the screw again.
7. Always unplug the appliance when it is not used.
23
MAINTENANCE/ CLEANING
Disconnect from mains before maintenance or
•
cleaning.
Use only a damp cloth to clean the enclosure.
•
Switch off and unplug from the power supply before
•
assembling or disassembling and cleaning.
Keep the air vents at the rear of the main body free
•
from dust or fluff– use a vacuum cleaner to remove
these when necessary. Do not probe any opening to
remove fluff.
Fan component parts should be cleaned using mild
•
soap and a damp cloth or sponge. Do not allow any
water or other liquid to enter the motor housing.
Thoroughly remove soap film with clean water
•
Have your product repaired by a qualified person.
•
This electric product is in accordance with the relevant
•
safety requirements.
Repairs should only be carried out by qualified persons
•
using original spare parts, otherwise this may result in
considerable danger to the user.
Please contact the store which you bought the
•
product for after sale services if any.
DISPOSAL INFORMATION
When the time comes to eliminate this product, please consider the
environmental impact and take it to recognised recycling facility instead of
disposing it with general household waste. Take the equipment to a waste
disposal site. Plastic and metal parts that are used in the construction of
this appliance can be separated into pure grade which allow recycling. Ask
to your service centre for details. Everyone of us can participate on the
environmental protection.
AC230-240V 50Hz 50W
24