Getting To Know Your Monitor - Angelcare AC315 Manual Del Usuario

IMPORTANT
The Sensor Pad will be automatically ACTIVATED when the screen returns to video display view.
If no movement is detected on the surface of the Sensor Pad after 20 seconds, a series
of loud beeps will emit from the Parent Unit & Camera ‑ this is the movement alarm.
When activating any functions on your monitor, to prevent this alarm either:
1) Gently tap the surface of the pad
2) De‑activate the movement function, see below for information
STEP 5 ‑ GETTING TO KNOW YOUR MONITOR
TOUCH CONTROL KEYS
Access to the different
operation settings
Navigate the different
functions
The Angelcare monitor can be used with the pre‑programmed factory settings or you can
®
also customize your settings to your preference.
Movement &
Temperature Reports
General Settings
Camera Settings
Movement Sensor
Pad Settings
Temperature Settings
Pairing Units
IMPORTANT
When in menu or sub‑menu modes, sound transmission between the Parent Unit and the
Camera will be temporarily deactivated. ONLY movement‑detection alarm will remain
active (if function is activated).
5.1 ‑ SENSOR PAD
TO ACTIVATE/DEACTIVATE THE SENSOR PAD:
02:04 18°C
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
241AC_10_AC315_EU2_M2.indd 69
18°C
1) In the Sensor Pad settings, press the
activate/deactivate the Sensor Pad (when activated the
toggle will turn blue).
2) Press the down arrow
bottom will be highlighted in blue then Press the
2
button to save the settings.
Exit or to go back to main menu when
in sub‑menu
Confirm a selection or setting and allows
you to access to a quick menu
18°C
till the Save icon at the
E
N
Pause Sensor
Pad
Adjust LCD
Brightness
Pan & Zoom
Active Camera
Indicator
button to
69
2018-02-26 1:34 PM