Kichler Terra Select 52" Manual De Instrucciones página 8

HANGING THE FAN
Step 6. Loosen the two set screws and remove the hitch pin and retaining clip from
the coupling on top of the motor assembly. (Fig. 8)
Step 7. Carefully feed the electrical lead wires from the fan up through the
downrod. Thread the downrod into the coupling until the Hitch pin holes are
aligned.
Next, replace the hitch pin and retaining clip. Tighten both set screws. (Fig. 8)
Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod.
Thread the hanger ball onto the downrod, insert the cross pin through the
downrod and tighten. Now tighten the set screw. (Fig. 9)
8 | KICHLER.COM
Supply wires
Downrod
Set screw
Retaining clip
Set screw
Fig. 8
Downrod
Canopy
Coupling cover
Canopy cover
Set screw
Hitch pin
Retaining clip
Fig. 9
Hitch pin