Tabla de contenido
Idiomas disponibles
Idiomas disponibles
e)
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a
hazardous situation.
5)
Battery tool use and care
a)
Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
b)
Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
EN
d)
Under abusive conditions, liquid may be ejected from the battery; avoid
4
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause irritation
or burns.
6)
Service
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR ALL OPERATIONS :
Safety warnings common for grinding, sanding, wire brushing, polishing, carving or
abrasive cutting-off operations:
a)
This power tool is intended to function as a grinder, sander, wire brush,
polisher, carving or cut-off tool. Read all safety warnings, instructions,
illustrations and specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
b)
Do not use accessories which are not specifically designed and recommended
by the tool manufacturer. Just because the accessory can be attached to your power
tool, it does not assure safe operation.
c)
The RATED SPEED of the accessories must be at least equal to the operating
speed setting marked on the power tool. Accessories running faster than their
RATED SPEED can break and fly apart.
Tabla de contenido
