Ac/Dc Current Measurement - King Tony 9OM1371 Manual De Instrucciones

2-2-4 AC/DC Current Measurements
To avoid injury, do not attempt a current measurement
if the open circuit voltage exceeds the rate voltage
of the meter.
Connect red test lead to the "mA / uA "jack for Current
1
measurements up to 400mA.( For measuring Current between
400mA to 10A , Connect red test lead to " 10 A " jack ) Connect
black test lead to" COM " jack.
Set Range selector Switch to desired A range and press
2
DC/AC button to select AC/DC function.
Cut the power to the circuit to be tested and Connect the instrument
3
IN SERIES with the circuit with the black test lead on the negative
" - "side and the red lead on the positive " + "side being measured.
Apply power and read the ampere value on LCD.
4
uA . mA measurement
16
WARNING!
Amp measurement