Luminance Brands Kathy Ireland Home LK500 Serie El Manual Del Propietario página 7

3. Installation on Luminance Brands Fans Having a
Modular Switch Housing with Center Screw
3.9
Reconnect the Motor Connector to the Switch Housing
Connector (Figure 7) .
Carefully tuck all Wires and Connectors into the Switch
Housing (Figure 7) .
Position the Switch Housing/Light Fixture Assembly
onto the Cover Plate .
Reinstall the Three Screws (previously removed in
Step 3 .2) and tighten securely (Figure 7) .
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires between switch housing and the cover
plate.
3.10
The Light Sockets are equipped to accept Three
9 .5-Watt Medium Base A19 LED Bulbs (supplied)
(Figure 8) .
3.11
Gently place the Shade onto the Light Fixture
Assembly .
Secure the Shade by installing the Rubber Washer and
Thin Hex Nut finger tight on the Light Fixture Assembly
Threaded Shaft (Figure 9) .
NOTE: It is advisable to periodically check the
tightness of the thin hex nut.
NOTE: It is critical that the fan chain(s) are aligned
with hole(s) in the shade and bowl cap for smooth
operation of the fan switch(es).
SWITCH HOUSING
SCREWS (3)
SWITCH
HOUSING/
LIGHT
FIXTURE
ASSEMBLY
Figure 7
LIGHT
SOCKETS (3)
Figure 8
SHADE
THREADED
SHAFT
RUBBER WASHER
THIN HEX NUT
Figure 9
7
(continued)
COVER PLATE
MOTOR
CONNECTOR
SWITCH
HOUSING
CONNECTOR
9.5-WATT LED MEDIUM
BASE BULBS (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: LK500