Luminance Brands Kathy Ireland Home LK500 Serie El Manual Del Propietario página 11

4. Installation on Luminance Brands Fans Having
Two-Piece Die-Cast Switch Housing (continued)
4.6
Carefully tuck all Wires and Connectors into the Switch
Housing (Figure 16) .
Position the Switch Housing Cover/Light Fixture
Assembly onto the Switch Housing and reinstall the
Two Screws (previously removed in Step 4 .2) and
tighten securely (Figure 16) .
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires between switch housing and the cover
plate.
4.7
The Light Sockets are equipped to accept Three
9 .5-Watt Medium Base A19 LED Bulbs (supplied)
(Figure 17) .
4.8
Gently place the Shade onto the Light Fixture
Assembly .
Secure the Shade by installing the Rubber Washer and
Thin Hex Nut finger tight on the Light Fixture Assembly
Threaded Shaft (Figure 18) .
NOTE: It is advisable to periodically check the
tightness of the thin hex nut.
NOTE: It is critical that the fan chain(s) are aligned
with hole(s) in the shade and bowl cap for smooth
operation of the fan switch(es).
SWITCH
HOUSING
SWITCH
HOUSING
COVER
REINSTALL
SCREWS (2)
Figure 16
LIGHT
SOCKETS (3)
Figure 17
SHADE
THREADED
SHAFT
RUBBER WASHER
THIN HEX NUT
Figure 18
11
LIGHT FIXTURE
ASSEMBLY
9.5-WATT LED
MEDIUM BASE
BULBS (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: LK500