SPECIFICATIONS
Model Nr.
Accuracy
Square Driver
Torque Range
Resolution
Size
Weight
Memory
Operation Modes
Unit Selection
Battery
Operation Temperature
Storage Humidity
Operation Humidity
Auto Shut Off
IMPORTANT
Read this manual before operating the torque wrench. Failure to follow instructions listed in this guide
may result in damage of electrical system, wrong torque setting and/or serious injury
FEATURES
50 data sets of memory capacity
•
•
2 LEDs red / green for visual alerting
72 gear teeth
•
Standard functions: torque setting, measurement setting, mode setting
•
•
Operation in both clockwise and counter-clockwise directions
LCD display shows kg/cm, lb-in, lb-ft, N/m
•
Audible torque confirmation by means of buzzer
•
•
Easy to set up Peak or Trace modes
Anti-slip soft grip
•
WARNING
•
Please use the torque wrench in a clean and dry place only.
Do not use organic solvents to clean the torque wrench.
•
Clean the torque wrench and LCD panel with a soft dry cloth only.
•
•
Keep children and unauthorized persons out of the working area.
Do not immerse the torque wrench in any liquids.
•
•
Remove the batteries, when the torque wrench is not use for a longer period to avoid the
wrench damage.
Do not disassemble the torque wrench and do not make any changes to the wrench.
•
•
Do not shake or drop the torque wrench.
•
Do not leave the wrench at place of over-heating, humidity or direct sun.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Digital Torque Wrench
BGS 950
± 2 %
12.5 mm (1/2")
40-200 Nm
0.1
480 x 40 x 40 mm
1.05 kg
50 data sets of memory capacity
-10°C ~ 60°C (13.9°F ~ 139.9°F)
-20°C ~ 70°C (-4°F ~ 157.9°F)
After 80 seconds of no use
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 951
± 2 %
10 mm (3/8")
27-135 Nm
0.1
380 x 35 x 35 mm
0.66 kg
Peak or Trace
Kg-cm, Ib-in, Ib-ft, N-m
1.5V AAA (2 pcs)
15% ~ 90%
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 950
BGS
951
BGS
952
BGS 952
± 4 %
6.3 mm (1/4")
6-30 Nm
0.1
290 x 35 x 35 mm
0.4 kg