Installation - Glacier bay F51AC074CP Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply. Remove the old faucet.
Clean off the mounting surface.
Ensure the gasket (P) is on the bottom of the new
faucet (A).
Place the faucet (A) through the mounting holes
in the sink.
Secure the faucet (A) to the sink using the
mounting nuts (C) provided.
NOTE: If the sink is uneven, use silicone under the
gasket (P).
C
2
Preparing the pop-up assembly
Remove the pop up stopper (H) and drain flange (D)
from the drain body (G).
Screw the lock nut (F) all the way down, and push
the rubber washer (E) down.
A
E
F
P
4
1
2
G
H
D