Configuring The Computer; Configuring The Ip Address - Conceptronic C150BRS4 Manual De Instrucciones

4.1 Configuring the IP address

The C150BRS4 is equipped with a built-in DHCP server. The DHCP server will automatically assign an IP
address to each connected computer if the connected computer is configured to automatically obtain an
IP address.
Most computers are by default configured to automatically obtain an IP address. Should this not be the
case, you will need to configure your computer to obtain an IP address automatically by following the
instructions below.
A. Click on 'Start', go to 'All Programs',
'Accessories' and choose 'Run'.
B. Enter the command 'NCPA.CPL' and click on
'OK'.
The "Network Connections" window will appear.
C. Right click on 'Local Area Connection' or
'Wireless Network Connection' (depending
on the connection you use) and select
'Properties'.

4. Configuring the computer

B
B
C
ENGLISH
29