Idiomas disponibles

Idiomas disponibles

Description
Read priming instructions on page 2 prior to
use.
Models 555 and 555-E have a dual-leverage feature
which allows them to be operated in either volume or
pressure modes. With the link in the volume position,
the guns deliver 1 ounce (28.4 grams) of grease in 30
strokes. Shifting the link to the pressure position allows
the guns to develop 7500 psi (517 Bar).
The guns are capable of 3-way loading: cartridge,
suction, and loader pump (requires optional loader
fitting 306740 or 322610). Capacity is 16 ounces (454
grams) bulk or 14.5 ounce cartridge.
The guns are spring-primed and have an air bleed
valve to aid priming. The seals are Buna-N (nitrile) for
compatibility with petroleum based greases.
Operation
WARNING
These grease guns can develop up to 7500 psi
(517 Bar) pressure.
Use safety goggles and gloves when operat-
ing gun.
Personal injury can occur. If injection injury
should occur, seek immediate medical atten-
tion.
Gun
Model
555
555-E
670963
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
Pistol-Grip Grease Gun
Cylinder
Capacity
Extension
Ounces Grams
Rigid
16
454
Flexible
Table 1 Pistol-Grip Grease Gun Models 555 and 555-E Specifications
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
Copyright
This document contains confidential information that is the property of Alemite LLC
Link
Head
Air Bleed Valve
Rigid Extension
5.35" (13.7cm)
(on Model 555)
1/8" NPTF
Flexible Extension
18" (45.7cm)
(on Model 555-E)
Figure 1 Pistol-Grip Grease Gun Models 555, 555-E
Cartridge
Delivery/Stroke
Size
Ounces
Ounce
Grams
14.5
0.033
Alemite LLC
©
2008 by Alemite LLC
(1/8" NPTF)
End Cap
Follower Rod Handle
Maximum Pressure
psi
Bars
0.94
7500
517
Revision (2-09)
555
555-E
Lever
Pipe Plug
Cylinder
SER 555
Tabla de contenido
loading

Resumen de contenidos para Alemite 555

  • Página 1 167 Roweland Drive, Johnson City, Tennessee 37601 www.alemite.com © Copyright 2008 by Alemite LLC SER 555 This document contains confidential information that is the property of Alemite LLC 670963 Revision (2-09) and is not to be copied, used, or disclosed to others without express written permission.
  • Página 2 5. Disengage Follower Rod from Cylinder Cap and push into cylinder. Loader Pump NOTE: Before gun can be loaded from a loader pump, pipe plug in Head must be replaced with an Alemite 306740 or 322610 Loader Fitting. WARNING Do not use a high-pressure grease fitting as a loader fitting.
  • Página 3 14.5 0.033 0.94 7500 555-E Flexible Tablleau 1 Spécifications des pistolets graisseur modèles 555 et 555-E Alemite LLC 167 Roweland Drive, Johnson City, Tennessee 37601 www.alemite.com Copyright © 2008 par Alemite LLC SER 555 Le présent document contient des informations confidentielles appartenant à Alemite LLC 670963 Révision (12-08)
  • Página 4: Chargement Par Succion

    Chargement par cartouche 2. Loger le raccord de chargeur dans le manchon de raccord (Alemite No. 306741) sur le chargeur. 1. Dévisser le cylindre de la culasse. 3. Actionner le chargeur jusqu’à ce que la rainure sur la tige du fouloir soit visible.
  • Página 5: Guía De Servicio

    14.5 0.033 0.94 7500 555-E Flexible Tabla 1 Especificaciones de la pistola engrasadora con mango de pistola Modelos 555 y 555-E Alemite LLC 167 Roweland Drive, Johnson City, Tennessee 37601 www.alemite.com Copyright © 2008 por Alemite LLC SER 555 El presente documento contiene información confidencial que es propiedad de Alemite LLC 670963 Modificación (12-08)
  • Página 6: Carga De La Pistola

    NOTA: Antes cargar una pistola desde una bomba cargadora, debe reemplazar el tapón macho roscado en el cabezal con un accesorio de cargador Alemite 306740 ó 322610. ADVERTENCIA No utilice un accesorio de engrase de alta presión como accesorio del cargador.

Este manual también es adecuado para:

555-e

Tabla de contenido