Tools And Materials; Before You Begin - Kohler K-3607 Guia De Instalacion

Tools and Materials

10" Adjustable
Wrench
Supply
Shut-Off
Valve
Hacksaw
Tubing Cutter

Before You Begin

DANGER: Risk of electrical shock. Connect to a properly
grounded, grounding-type receptacle, protected by a
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD).
CAUTION: Risk of product damage. Handle with care.
Vitreous china can break or chip if the bolts and nuts are
overtightened, or if the product is handled carelessly.
IMPORTANT! Record the model number (from the label on the box)
in the Homeowners Guide for reference.
A dedicated 120 VAC, 15 A, 60 Hz circuit (protected by a Class A
GFCI or RCD) is required for installation.
NOTICE: The Canadian Electric Code requires receptacles installed
in bathrooms to be located at least 1 meter from a bathtub or
shower if practical, but in no case less than 500 mm. If the
installation is in Canada, install this unit in accordance with the
Canadian Electrical Code, Part 1.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
Kohler reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1092035-2-A
Level
Sponge
Tape
Measure
Plus:
• 5/16" T-Bolts w/ Nuts and Washers
• Putty Knife
• Screwdriver
• Electrical Tools and Supplies
Safety
• Metal File
Glasses
2
Wax Seal
Kohler Co.