Hoover REWIND Manual De Instrucciones página 13

Keep your Rewind Running Properly: Cleaning Rinsable Filter
IMPORTANT
Allow filter to dry
To reduce the risk of personal
completely before
replacing. Dry filter on edge
so air circulates
servicing. Do not use vacuum
on both sides of the
filter. This will take
at least 24 hours.
WARNING
Very fine materials,
such as face powder
or cornstarch, may seal the
filter and cause a reduction
in performance. When using
the vacuum for this type of
dust,
empty the cup and
clean the filters often.
WARNING
injury - Unplug before
cleaning or
without dirt
cup or filters in place.
What to Buy:
Rinsable Filter
When used and
maintained properly,
your Rinsable Filter
should not need
1
replacement within
the warranty period.
If desired, additional
filter is available at Hoover.
com or call 1-800-944-
9200. Ask for Hoover Part
®
No. 304087001
2
Remove the dirt cup.
Twist the lid open. Pull
tab to remove the filter.
24 hours.
3
Rinse for 2 minutes Replace the filter, tab
in clear warm water; side out.
dry for Twist lid securely until
a minimum of it clicks.
10